Metravi 16+ Universal Source Thermocouple Calibrator

Product Description

• High precision and combination of RTD and Thermocouple (TC) calibration
• Source and measure 14 types of RTD and resistance
• Source and measure 11 types of thermocouples (TC)
• 4W, 3W, and 2W connections for RTD simulation and measurement
• Current calibration of 4 fixed values (100A, 250A, 1mA, and 2mA)
• C and F selectable
• Accept a wide range of excitation current (0.05mA to 5mA) for RTD simulation
• Individual Thermocouple cold junction compensation (CJC) for simulation and measurement of thermocouples. CJC can be used to fine-tune
• temperature calibration.
• Easy 0% and 100% setup and operation
• Easy 25% (up) and 25% (down) for temperature calibration.
• Individual memory of 0% and 100% setup for different RTD types and thermocouple types
• Auto step and auto ramp for easy linear calibration
• Detection of too low or too high excitation current (LO or HI) from the measurement device
• Warning of exceeding calibrator driving current (IEX Memory of the last setup when powering off
• Easy numerical keypad for input
  Dot Matrix LCD with backlight
  Very low power consumption of 30mA with backlight off
  15 minutes smart auto-power-off. 15 minutes timer resets itself when any
  input changes
  2 minutes smart auto-backlight-off. 2 minutes timer resets itself when any
  input changes